I am placing notes that call out material and below that callout and a note.
My workflow is tedious.
Place note
TYPE IN THE MATERIAL CALLOUT WITH A TEXTSYLE THAT HAS A BOX AROUND THE MATERIAL CALLOUT
THEN FOR THE LINES BELOW, I SELECT A NEW STYLE WITHOUT THE BOX.
I would like to automate this
I thought a good way would be
1. place all notes without the box
2. Select all notes
3. find all the text WD1 and replace the text-style for only WD1
anyway I could do this? Batch check text style
what would be nice is to have a list of common callouts that would be changed to have the text-style changed
and I need some programming magic that's above my skill set
Kirk
I Wish Cadland was Reality
Simple solution is to place one Note with correct format, copy it, edit.
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
Yep, that makes sense. Place it correctly, then just copy and edit. Notes are SO much easier to place correctly the first time than they are to try to change style after they are placed. It probably wouldn't take significantly more time than typing and placing them all.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2