Hi all
Have you the same problem that I have noticed lately?I have problems with my connect version and the problem is the speed/response time that really has gone slow, I don´t know if this has to do with Acad 2023 combined with Microstation Connect edition Version:10.17.01.58 but something has happened. This is most when I have an civil Xversion DWG file as an referens file to microstationwhen everything inside Microstation is taking loooong time to process.
I start the question with this word to see if someone else has noticed the same problem.
regards
Tom
Hi MarkI did not have to test to unistall in order to the "easy fix" within layer/level the speed of Microstation was normal
//Tom
OK cool, so not related to your original question.
Regards,
Mark
OpenRoads Designer 2023 | Microstation 2023.1 | ProjectWise 2023
Poor AutoCAD drawings (using tight hatches instead of solid hatch for fill) is nothing that can be compensated by MicroStation. Whomever is creating the DWG files needs to draw them correctly for them to perform well.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Answer Verified By: Tom
It could be compensated by Microstation if Microstation would use hardware acceleration for custom lines. For ACAD all lines are custom lines so that slows working with DWG format.
Hi MarkMy result after the test that showed no problem in microstation itself, the problem was as Mary B wrote "poor autocad drawings".
My result of investigation is related to this issue, but the answer to my question is not answered with any solution related to micrstation.The issue is not microstation but Acad DWG "Poor AutoCAD drawing" and don´t need any "unistall object enabler"
So Microstation users who have this issue is recommended to look thrue the information in DWG file rather than directly unistall object enabler
Best regards