Hi everyone,
I saw a few posts that explained how to export the models in a dgn file to seperate DWG files
https://communities.bentley.com/products/microstation/f/microstation-forum/171130/export-file-with-multiple-models-as-seperate-files/492329
, however I was wondering whether it's possible to save a dgn file with multiple models to seperate dgn files instead.
One method would be to select each seperate model under the Save As DGN Options and choose the Models options under the Filter tab. This allows you to select which models you want to save to a new DGN file.
Save As V8 Options Dialog, Filter Tab
RegardsAndrew BellTechnical SupportBentley Systems
So, we would have to save them off one at a time? One "Save As" for every model in the design file? There's no way to separate them out in a single process?
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2
Don't see any way to do that directly. You can save them off as DWG, then use a batch process to them them as DGN. Depending on the content of the file, you'll need to get all the Settings just so.
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
I would think that you should be able to do it via VBA; quick and easy, plus you can specify a naming convention and save location at the same time.
hi Barry, I would be interested in a vba solution. Do you know by any chance if there is some code/documentationt available that shows how you can do that?