Snap to all lines on multi lines

RE: Snap to all lines on multi lines

Jayson Perry — Fri, 24 Feb 2023 22:31:42 GMT

Hi Zach,

Thanks for the post - sorry to hear that you are running into issues.
Could you post a .dgn file with an example of this case so we can try to reproduce the problem? When you reply, you can just select Insert>Image/video/file.

In the meantime, here are a couple of initial thoughts on this:
- What is your snap mode set to? Try changing the Default Snap mode to something else. "Nearest" and "Multi-snap 1/2/3" are good for picking up many points on an element. (Drawing Aids Tab>Snaps Ribbon Group>Default Snaps

- Check AccuSnap settings (small square with arrow in bottom right of above photo)

- If you create a new file and create a multiline, can the issue be replicated?

-Jayson P.

RE: Snap to all lines on multi lines

Zach Chimoff — Thu, 23 Feb 2023 18:17:51 GMT

That is kind of what I was figuring too. This is also happening to other people in my office too. Just wanted to see if it was known.

Thank you though!

RE: Snap to all lines on multi lines

Bob Rayner — Thu, 23 Feb 2023 18:16:06 GMT

Sounds like a typical Connect bug. They get rid of 3 and add 2. We are un-paid beta testers.

You can file a service ticket, my guess they'll be unable to replicate.

RE: Snap to all lines on multi lines

Zach Chimoff — Thu, 23 Feb 2023 18:03:22 GMT

Yes, on the newest update. After messing around with it more it seems to snap if I am zoomed out just not when I am zoomed in close.

RE: Snap to all lines on multi lines

Bob Rayner — Thu, 23 Feb 2023 17:28:03 GMT

Is this with 10.17.02.61? Unable to replicate.