Pdf Printing from microstation issue

Hello Sunil,

For starters, please let us know which exact version of Microstation you are using.

Also let us know if you use "Raster" printing or not? Then try the other option to see if the problem persists.

Hi Johan
I am using Microstation connect edition I keep "Raster"printing on still the circle is not visible properly

Sunil Patil said:

I am using Microstation connect edition

This is still not very specific. Which exact version are you using?

See this blog that shows you how to obtain MicroStation's version number.

Are you saying this is the result with raster printing on? Does it also happen when raster printing is off? Judging from the small screenshot in your original post it looks like something I would print without rasterizing anyway.

 its not problem of rasterized print i guess every thing ok but only the full circle looks half when i print pdf when i zoom that circle in microstation the cirlce also shows half but when i zoom out it appearss full

What linestyle have you used for that circle? I have seen some linestyles where the gap/dash proportion is larger than the actual element.

What linestyle have you used for that circle? I have seen some linestyles where the gap/dash proportion is larger than the actual element.