Parametric Cell- different numbers of holes

Question

Hi everyone, 
 I need to do 2D parametric cell where will change count of holes by hand. Here is example. 
 
 Now Im able by changing numbres of holes change diametres, but i dont know how to make there more holes. For example i got 2x2, when i change for 3x3 dimensions are good (58,8 x 54,2), but i have there still just 4 holes not 9. I know that i can make more variantions and uploud them to Components Center, but i want it smart and have just one cell.

Carl Myhill · Answer

Currently the 2D Array tool does not support the assignment of Variables, for this you might want to up vote Idea MS-I-246 
 If your able to produce a 3D Parametric Cell then you could perhaps utilize the Array Feature tool, to array the Holes. Although in the sample you have provided the Holes exceed the Solids extent and by an unknown distance/offset. 
 
 In this example, I created Variables for both row and column spacing and quantity and assigned these to the Array Tool (See Image above) to drive Variations of Solids.