VBA interface error: could not find project or project file

VBA interface error: could not find project or project file

Cannot open Auto Table to register

Parents
  • The error message "MicroStation VBA interface error: could not find project or project file" can occur for a number of reasons, including:

    • The MicroStation VBA project file is missing or corrupt.
    • The MicroStation VBA project file is not registered with MicroStation.
    • The MicroStation VBA project file is not compatible with the version of MicroStation that you are using.
    • There is a problem with the MicroStation VBA environment.

    To resolve this error, try the following steps:

    1. Verify that the MicroStation VBA project file is present and that it is not corrupt.
    2. Register the MicroStation VBA project file with MicroStation.
    3. Verify that the MicroStation VBA project file is compatible with the version of MicroStation that you are using.
    4. Repair or reinstall MicroStation.

    If you are still unable to resolve the error you might consider contacting the company that produces the Auto-Table software, which appears to be AutoDesk, as they may have a solution.

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Reply
  • The error message "MicroStation VBA interface error: could not find project or project file" can occur for a number of reasons, including:

    • The MicroStation VBA project file is missing or corrupt.
    • The MicroStation VBA project file is not registered with MicroStation.
    • The MicroStation VBA project file is not compatible with the version of MicroStation that you are using.
    • There is a problem with the MicroStation VBA environment.

    To resolve this error, try the following steps:

    1. Verify that the MicroStation VBA project file is present and that it is not corrupt.
    2. Register the MicroStation VBA project file with MicroStation.
    3. Verify that the MicroStation VBA project file is compatible with the version of MicroStation that you are using.
    4. Repair or reinstall MicroStation.

    If you are still unable to resolve the error you might consider contacting the company that produces the Auto-Table software, which appears to be AutoDesk, as they may have a solution.

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Children