I'm having an issue where the display order priority of elements in a model is not being honoured when that model is referenced into another file. In my model the elements all appear as they should, like this:
. This includes the boundary around the sign detail being filled. When I reference that into a drawing it comes out looking like this:
The levels are all present and selectable in the drawing, but the level display priority order isn't being honoured so the boundary hatch is appearing in front of nearly all of the other elements. The display order is correct in my model, with the sign elements as priority 500 to make sure they appear on top and the boundary fill as priority 0, but it doesn't appear like that in my drawing. Can anyone help please, as I'm going spare trying to figure this one out!
What version of Microstation are you using and are you working with any 3d files?
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453
MS Connect 10.16.02.34. There is one 3D model referenced into the drawing (not the one in question), all others are 2D.
Greg Eden said:There is one 3D model referenced into the drawing (not the one in question)
So all data in the 3d file is showing correctly?
Have you checked the reference display order?
The references are showing in the correct order, it's just the levels in one of the references that aren't showing in the right order.
You may need to change the display order of that reference file in Reference Manager. Are you familiar with how to do that?
This is from Microstation 2023 help but it is relevant for 10.16 docs.bentley.com/.../ReferenceFilesUpdateSequence.html