(Posted on behalf of a Be Communities member.)
Purchased a new GTCO CalComp DrawingBoard VI digitizer to be used with MicroStation V8i SS2 and Windows7. We have limited success with it working. For example, we have been able to attach matrix menus, but not a command menu. We are also having trouble configuring the 4-button puck - it accepts the changes, but does not keep them.
We installed wintab.exe.
Can you tell me if the following digitizer is compatible with MicroStation V8i and Windows 7:
GTCO Calcomp DrawingBoard VI, 12" x 18", Model DB6 1218
Can the GTCO Calcomp DrawingBoard VI, 36" x 48" digitizer on Windows 10 with Microstation v8i (SelectSeries 10) be made to work with any driver other than the Bentley wintab driver, for example GTCO's Tablet Works 11.1? Specifically, I need information on how to configure the TabletWorks driver or the Digitizer Technology driver. I was told by support that the Wintab.exe driver (32 bit) is incompatible with 64 bit operating systems. Any help on this would be greatly appreciated.
The Wintab.exe driver works fine with Windows 10.
I have an old Intergraph (Kurta) 18x12 tablet that I have working with both V8i and CONNECT in Windows 10.
We also have Calcomp Digitizers that work just as well in Windows 10.
Just try it and see if it works for you.