(Posted on behalf of a Be Communities member.)
Purchased a new GTCO CalComp DrawingBoard VI digitizer to be used with MicroStation V8i SS2 and Windows7. We have limited success with it working. For example, we have been able to attach matrix menus, but not a command menu. We are also having trouble configuring the 4-button puck - it accepts the changes, but does not keep them.
We installed wintab.exe.
Can you tell me if the following digitizer is compatible with MicroStation V8i and Windows 7:
GTCO Calcomp DrawingBoard VI, 12" x 18", Model DB6 1218
It should be in the same directory as ustation.exe.
Turn off and then on your tablet.
Run Wintab as Administrator and change the settings. Click Ok.
Open it again and change the settings again if you need to. Click OK again.
Sometimes it might take a few attempts to register.
Are you using a dedicated COM port, or a USB adapter ?
If you're using a USB adapter, try using a different USB port.