Key-in for Text Justification Control

I saw a piece of an article, it referenced a text2 file, I could not find. I found the file plotdlg.ma what a really big help, once I worked through it. I was looking for a similar file on text key-in commands. I went to Ina, but the note claimed the list was no longer being kept up ?.

My problem many times when I open a drawing to edit the text will be left and I need center or right and I need left. I would like a way to just key-in what I want first and not go to paste the text and the justification is off. Any help from some of you really smart guys like Mr. Phil?

Parents
  • I am not sure exactly what your issue may be regarding. It sounds like you may be talking about a particular article on BE Community. Is it possible to provide a link to this article so we can see what it may be about.

    It sounds like your issue may be related to a problem with the justification of text. Maybe you could expand on this description so we can further investigate what may be your problem.

    Also, I am assuming your issue is regarding Microstation but which version of software are you using. This can be located under > Help > About Microstation.

    It is also quite useful to provide example design files or screen captures to help with the explanation of your issue.

    Regards

    Andrew Bell

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Reply
  • I am not sure exactly what your issue may be regarding. It sounds like you may be talking about a particular article on BE Community. Is it possible to provide a link to this article so we can see what it may be about.

    It sounds like your issue may be related to a problem with the justification of text. Maybe you could expand on this description so we can further investigate what may be your problem.

    Also, I am assuming your issue is regarding Microstation but which version of software are you using. This can be located under > Help > About Microstation.

    It is also quite useful to provide example design files or screen captures to help with the explanation of your issue.

    Regards

    Andrew Bell

    Regards
    Andrew Bell
    Technical Support
    Bentley Systems

Children
No Data