Hi
I have a water distribution system drawn in microstation where all the pipes have been classified by their sizes ( by several levels). my boss wants me to add another level to the drawing which indicates the content of pipes (rather than their sizes) but he wants this two levels be linked together so that every time they make a change on let say level 1 level 2 can automatically be updated accordingly ( without manually assigning the changes). is there such an option in Microstation. If anyone can help me I will be very grateful.
Thanks
You can use a multi line stacked both with offset 0. However you are limited to lines and linestrings, no arcs
Thank you very much David. that was exactly what I needed:-)
There is an option to link a Reference attachment with a Level.
If the Level is turned Off the Reference Display is turned Off. Each Reference attachment can have different levels turned On/Off
Just a thought. Don't know if it helps.
I Hope This Helps Someone Reading This! (Intergraph>PseudoStation>MicroStation user since 1980's)