• State Not Answered
  • Replies 4 replies
  • Subscribers 111 subscribers
  • Views 13115 views
  • Users 0 members are here

Draw Line between two lines at a specific distance

cmeuser
Offline

Good Day everyone,

I was asked if there was a way to draw a line that has a specific length (say 10ft) between two elements.

Any suggestions are welcome.

Parents
  • 0 Offline

    Use the Place Line command. In the Tool Settings Dialog key-in 10. That will produce a line 10 units long from the firt data point. You can then place the second data point anywhere.

    Microstation CONNECT - 10.17.2.61

    ORD - 2021 R1 10.10.1.3

    ORD 2022 R1.1 - 10.11.3.2

    ORD 2022 R3 -  10.12.2.4

    Microstation v8i SS 10 - 08.11.09.919

    Power InRoads v8i - 08.11.09.615

    ProjectWise - 10.0.3.453

Reply
  • 0 Offline

    Use the Place Line command. In the Tool Settings Dialog key-in 10. That will produce a line 10 units long from the firt data point. You can then place the second data point anywhere.

    Microstation CONNECT - 10.17.2.61

    ORD - 2021 R1 10.10.1.3

    ORD 2022 R1.1 - 10.11.3.2

    ORD 2022 R3 -  10.12.2.4

    Microstation v8i SS 10 - 08.11.09.919

    Power InRoads v8i - 08.11.09.615

    ProjectWise - 10.0.3.453

Children
No Data
Communities
Support and Services
Training and Learning
Social Media