MICROSTATION-0,0,0 ORIGIN KEY-IN

press F11-> press"m"

at Data Point Keyin type whatever co-ordinate you want.

Is there a way to "ID" a point on the screen to know its location?

An easy method of moving an element to a specific location would be to use the keyin XY= or POINT ABSOLUTE

In this case you would snap to the point on the line you wanted to move to 0,0,0.

Then keyin XY=0,0,0, and accept the move.

Further information regarding this and other keyins can be found in the Help Documentation.

docs.bentley.com/.../ustnhelp655.html

Unknown said:

e a way to "ID" a point on

"Identify" the coordinate of that points?  press you mouse left and right button together.

Unknown said:

Is there a way to "ID" a point on the screen to know its location?

Turning on Running Coordinates from the Status bar may also be useful. For more information, see the Help Contents for the Status Bar

Regards,

Unknown said:

Is there a way to "ID" a point on the screen to know its location?

Turning on Running Coordinates from the Status bar may also be useful. For more information, see the Help Contents for the Status Bar

Regards,

look up tentative in help, out of the box left and right to ogether are the old tentative ( I personally prefer middle button) if you use tentative snap on an element it will give you the  cartesian coordiantes  in the message center lower left of screen also select an element  and information tool  or right mouse button properties is like the acad LIST and will list all the coordinates start finish and other  vertices... etc