• Removing underlying mesh grafics from a Parametric solid

    Hi, Are there any ways to remove (disable) an underlying mesh from a Parametric solid? I have created solid out of a mesh (visibility of edge facets of the mesh was set to remove the triangulation). The moment solid is created triangulation is visible…

  • bug Custom 3D linestyle using mesh element _Microstation connect ALL versions

    Is there anybody who can create a custom 3D linestyle using mesh element? I have try many way to create a custom 3D linestyle with a mesh element and it's not working. It was working fine in V8i SS4. So is this a known bug? The reason I want to use mesh…

  • Cutting a mesh object with a similar tool to cut solid

    I am having a issue where i need to cut a mesh object into individual mesh elements, i would usually convert the mesh into a solid and use the cut solid tool, however this makes my machine lock up. i am curious to know if MicroStation has a similar tool…

  • RE: Converting Mesh to Smart Solid problems

    Hi Oleg, I used the key in: convert to solid and the setting: smart solid and I could reproduce the same problem in MicroStation SS4. what software was used to create this mesh? Bentley MX? are all the models that give this problem created using…

  • RE: Mesh or surface to solid

    I believe the problems you are experiencing are related to the two surfaces having the same planar faces in the area shown below. If you remove these facets then the two surfaces will stitch and form a solid. Deposit_Model_3.dgn

  • Mesh or surface to solid

    Hi everybody! Please help me with this: I just cannot find the way how to convert this two meshes into a single solid. Can someone please explain how to do this. This is actually a bauxite deposit that I'm modelling. The mesh is from Power Inroads SS3…

  • RE: Cutting a Mesh with a Mesh

    I managed to achieve this using the following workflow, but note that the red Vertical mesh does fall beneath the green mesh in two locations ( See Image ) thus fill may also be required. 1. Used the ' Extract Boundary ' tool on the green mesh 2…

  • Scaling multiple points and mesh in 3D

    Hello, I have elevations that I have plotted in 3D and then I created a mesh by using the points. I would like to exaggerate the mesh by increasing the scale in the z directions to 25 but I am having a hard time figuring out the best way to do this…

  • (V8i SS3) Planar Slice on Mesh

    I have created a mesh and trying to planar slice the mesh that should then have 10cm slices. When I start the tool it thinks for a long time and then does nothing. Any ideas? I have done this method before, the only difference is the type of structure…

  • Acute3d Surface -> OBJ -> MicroStation Solid inconsistent results

    Hello, I hope this question makes sense because I've been stuck on this for a while now. I used Acute3d to create an OBJ file that I imported into MicroStation. Inexplicably, sometimes it appears as a surface and sometimes it appears as a wireframe…

  • Combining large meshes

    I have two large meshes ( a bathymetry and a topography) that I would like to merge into a single mesh. I'm using v8i SS3. I can stitch them together but there is a gap in the mesh where the two meshes didn't overlap. I've tried several methods of filling…

  • how to calculate the volume between the two meshes ?

    I created two meshes that cut across each other. Does anyone know how to calculate the volume between them? Because the volume measurement tool does not work in this case. I enclose a section photo. I will be very grateful!

  • Efficient mesh clipping

    Besides optimized fence clipping, is there a better way to clip a mesh model (created with the simple 'triangulate xy points' method)? Fence clipping is very slow, unpredictably crashes (this has been logged with Bentley support), and doesn't scale with…

  • CloudWorx: vertical mesh from points

    Hello, I'm trying to create mesh from points. There is no problem if the surface is facing into Z direction (like Terrain Model). But, I would like to create mesh from points on surface which is not horizontal (facing X direction) - triangles…
Communities
Support and Services
Training and Learning
Social Media