I have a small (but time consuming) challenge in that we have a ton of custom tool boxes created that all require re-pathing so it seems. I have before used Configuration Variables for loading Cell Libraries, but am curious to know if there is a way to attempt this with these tool boxes?
Additionally we will not only need to modify the UNC pathing here in Calgary but then will need to re-path the tool boxes again with two of our other locations in Denver and Mumbai.
Or even if there is a way to modify via PFE or a text editor of the USTN.m01 files?
It is not possible to edit these files with a text editor, as you may have tried already. Personally I prefer to push anything into a cfg/pcf/ucf as soon as a path name is required. This allows me to edit path names from a remote location without interfering with the user. A macro to launch path dependent things also works.
Ivo Blaauw= = = = = = = = = = = = =Look what the CAD dragged in...
If you are going to continue to use V7 then you should consider going back on all these and removing all references to cell libraries. Keep only the call to the cell itself. Include the cell library(s) in the celllist variable. You will never have this problem again at any of the locations.