• Replies 7 replies
  • Subscribers 21 subscribers
  • Views 9878 views
  • Users 0 members are here

HELP: Nesting with plotter, MicroStation [HP 1050c plus]

jlar

I've wasted enough paper..maybe someone can shed some insight on this problem:

Is there anything special I need to do if I'm trying to nest from MicroStation [iPlot] to a HP DesignJet 1050c plus?

Just can't get to the bottom of this..much appreciated * joe

Parents
  • Offline
    You have tried setting this at the control panel on the plotter right  and you have set the timer  high enough to wait before it decides not to nest incomming plans right?

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Reply
  • Offline
    You have tried setting this at the control panel on the plotter right  and you have set the timer  high enough to wait before it decides not to nest incomming plans right?

    Lorys

    Started msnt work 1990 - Retired  Nov 2022 ( oh boy am I old )

    But was long time user V8iss10 (8.11.09.919) dabbler CE  update 16 (10.16.00.80) 

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Children
No Data
Communities
Support and Services
Training and Learning
Social Media