My company just got an Oce TDS 700. I have been trying to create a plot driver for it. I have been unsuccessful so far. The only way I can get it to print from Microstation is to use the printer.plt driver to call the windows driver. It is very cumbersome. Does anyone out there have a 700 that they have a driver for.
I have tried a driver from one of our other offices that has an Oce TDS 600. They have no problems sending prints directly to the 600. When I try to use the driver Microstation says it is an invalid driver and will not load it.
Attached is one we use. It also points to the installed system printer but gives us a quick / painless wrapper.
Many things are currently hard coded such as our network share, defaults to an Arch D page size, etc. So you will need to edit accordingly to get it to work in your environment. But hopefully you can use this as a launching point.
-G-
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453
My pleasure.
I have a new problem. Everything is printing fine with this driver. However, I want to be able to write a driver that pulls the paper from 1 specific roll all the time. Since our OCE printer has 4 rolls I would like to make roll 4 mylar instead of regular paper. I have tried to define roll 4 in the plot driver but it is being ignored. How do I get the driver to pull from roll 4 only. Below is the line that defines the printer parameters.
sysprinter /name="\\engdat1\3rdProduction_TDS700" /form="34in Mylar" /orientation=landscape /offset=(0.0, 0.12) /unit=in /tray="Roll 4"
OS Windows XP
MS 08.05.02.70
OCE TDS 700 plotter
Thanks,
Mike