Printing Grids

I was wondering whether you can print the Grid (set by Grid Master/Grid Reference).

Thanks Darren

Parents
  • no you cant they are not real elements.

    But you can draw a grid pretty easy with the parallel copy if you want real lines for a grid and make them very faint grey..

    otherwise create a cell of a dot like the Grid master / grid ref and place cell by array and as your cell is printable it will work... I did this a long time ago for a client  and I made the dgn to be used as a reference file so just build your grid file and attach it as a reference file then you can turn it on off  scale it etc and always have it available to every one to use as a ref...

    Lorys

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Reply
  • no you cant they are not real elements.

    But you can draw a grid pretty easy with the parallel copy if you want real lines for a grid and make them very faint grey..

    otherwise create a cell of a dot like the Grid master / grid ref and place cell by array and as your cell is printable it will work... I did this a long time ago for a client  and I made the dgn to be used as a reference file so just build your grid file and attach it as a reference file then you can turn it on off  scale it etc and always have it available to every one to use as a ref...

    Lorys

    MicroStation user since 1990 Melbourne Australia.
    click link to PM me 

Children