Thanks in advance for taking the time to help me out. I am extremely new to Microstation with moderate CAD training on other software. I began a new job in a civil engineering firm and have set up my console to replicate the previous employee and I am having issues plotting files to get the same result as my coworkers on other consoles. I am getting nodes on my reference drawing that locate features that a surveyor took out in the field. The dots are being shown when plotted. I am on V8i (ver. 08.11.07.443) and my coworkers are using a MUCH older (pre2004 v8). When they open the same file in our network their nodes show up as squares and mine show up as points. I do not want these to plot. What steps can I take to prevent this?
I have this problem too, but a workaround I do is I go into the print dialogue settings and click off "constructions" and the points do not print
Thank you rcook, I will give this a try.
just be careful though, any cells you have in the file which are also considered "constructions" will not print either
This did not help the plotting of these points, the engineer here says that its ok, and after looking back over 10 years of files, almost all of them have them on there.