Print Orginizer through ProjectWise

I am working in ProjectWise and a managed workspace environment.  When trying to use print orginizer to batch plot cross sections it takes 30+ min to complete a full set of only 150 section sheets.

If I export the file to my local computer and detach all the reference files it takes less than 15 seconds.

What could possibly cause this difference is plotting speed?

Marc

PowerInroads 722

Parents Reply
  • Another thing you can test is to remove Power InRoads from the picture. Add the CONSOLEAPP check to the powerinroads.cfg file in the …/config/appl directory.

    • Open the file in a text editor

    • At the very top of the file i.e. before the first line, enter the following text on a single, separate line:

    %if !defined (_CONSOLEAPP)

    • At the very end of the file i.e. after the last line, enter the following text:

    %endif

    • Save and close the file

    Test Print Organizer and see if you see different results.
    What you are saying above is it takes approximately 12 seconds for each section sheet. That does not sound bad to me without seeing your data.

Children
No Data