Creating PDF of sheet files with Google Earth Image Superimposed in the Reference File.

The problem may be too much data to create a PDF in a timely manner. Assuming you are using pdf.pltcfg to create these PDF files, try lowering the resolution in the pdf.pltcfg file to 300,300. Other things to try: Set the RGB Raster Compression to JPEG, turn off some of the features such as searchable text, etc., to see if you can get a PDF created. We can then go from there...

Thanks for your quick response Dawn. All image that I captured are in JPEG which I then replace with color image saved from Google Earth at the same time I captured image for Microsation. All image are about 1100 * 600 resolution the lowest one I could go in Google Earth. I used the one with 300*300 resolution pdf.pltcfg. Still does not create for the particular sheet I am working on. Could it be PDF-XChange I am using is not compatible? I am not using Adobe.- I have something called PDF-XChange on my computer which I use for creating PDF's. But most of the sheets works fine. Only few does not just work.

You should not use the PDF-Xchange Printer driver, Use the Bentley PDF Printer driver instead:
--\WorkSpace\System\pltcfg\pdf.pltcfg
make copy for your needs, change it and use it

Niran, Frank is correct, you should be using pdf.pltcfg to create the PDF files from MicroStation. Please confirm...

I am using Bentley driver for sure - just a software is PDF Xchange not Adobe - and it works for most of the sheet files except some that does not work. I really wanted to get this resolved. It also works fine when image reference file is not attached. After I attached image reference file it gives me window that says "Rasterizing 1 of 70" and just stops in the middle. It take about 6 to 8 mins for the ones that works.

But are you using pdf.pltcfg or printer.pltcfg? pdf.pltcfg should not need PDFXchange or Adobe... we can take this offline and set up a meeting if you would like.

Yes, I am using pdf.pltcfg. I am trying couple of other stuffs to get this resolved. If I am successful I will surely share. If not. Yes, we may need to take this conversation offline and go from there. Will be posting soon.

Yes, I am using pdf.pltcfg. I am trying couple of other stuffs to get this resolved. If I am successful I will surely share. If not. Yes, we may need to take this conversation offline and go from there. Will be posting soon.

Just to let everybody know that the printing issue has been solved. I am still not sure if that could be the reason but what I did was separated Google Image file and the base file. I attached them separately in the drawing and it worked. I also noticed that when there is lot of image in the reference file it tends to take time during printing- suggesting to eliminate other images from the reference file which is not associated with the drawing sheet. Thanks for all the help!