I want to create a drawing with a 3D view and a title block.
When I do this I make a saved view in my 3D model that I use when placing the reference in the sheet space. Then I turn on "plot as 3D" in the reference dialog.
When I print the drawing there seems to be a 3D space that you would normally find in a 3D PDF, but it is completely empty. No geometry is shown.
I have had this problem on multiple projects and I cannot figure out what I am doint wrong. Anyone had this happen to them?
/Michael
Hi Michael,
Did you use the Bentley driver: pdf.ptlcfg and selected the Print to 3D from the print dialog? Please review this wiki article https://communities.bentley.com/products/microstation/microstation_printing/w/wiki/plotting-3d-models-faq
also review this Wiki article as maybe the problem is caused by the camera or lenshttp://communities.bentley.com/products/microstation/microstation_printing/w/wiki/14309.get-blank-3d-pdf-when-using-bentley-pdf-pltcfg-plot-driver-file
Regards
Maria