Call for Help!
We are having extreme difficulties in obtaining an acceptable standard of PDF form the advanced Print command in the GEOWEB.
The end users are wanting to use this function but the end result is unusable.
Has anyone suggestions on how we can fix this problem? We have raised a service ticket but as yet have had no feedback.
Below is a small clip from the PDF
Thanks in advance Cheers Kim
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
I have not used GEOWEB, but I assume msnt is the engine and printing to pdf is done through a plot.cfg file or driver... then examine the settings in the driver for what default resolution its using and change it to a higher value also see if the compression algorithm is set to the default zip if so change to jpg , use the pull down bottom right corner this will make higher res pdfs smaller in size ..... well they do in microstation....
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me