Ploting

RE: Ploting

Ed Yepes — Tue, 05 Dec 2017 20:36:10 GMT

Thanks for pointing out the typo. I would suggest you move to using .pltcfg files instead of .plt. Bentley will continue to support both formats but the .plt format files will not be delivered.

RE: Ploting

Shawn Chinudomsub — Tue, 05 Dec 2017 18:40:54 GMT

Could not find 'riff.pltcfg', but found 'tiff.pltcfg'. Maybe it is one of the same [just a typo]. It works. So, are you recommending me to replace my old '.plt' with '.pltcfg'? I have been using '.plt' for years. Never pay any attention to it.

Thanks.

RE: Ploting

mwlong — Tue, 05 Dec 2017 18:17:43 GMT

No, XM is old. Microstation Connect Edition is the latest. I believe they are on Connect Update 7 currently. Looks like your version is in the v8i edition.

RE: Ploting

Shawn Chinudomsub — Tue, 05 Dec 2017 17:36:43 GMT

All original, png.plt, wmf.plt, and tiff.plt.

Ed Yepes answer below has helped.

Thanks

RE: Ploting

Shawn Chinudomsub — Tue, 05 Dec 2017 17:32:30 GMT

Is XM the latest version?

RE: Ploting

Ed Yepes — Tue, 05 Dec 2017 14:59:38 GMT

They do the same thing, the biggest difference is that one can be edited in Notepad (.plt) and the other (.pltcfg) is in XML format for which Bentley provides a UI to modify. The .plt is subject to operator errors and to syntax issues. The .pltcfg is much user friendly to modify. The Help file provides information for what the records are in .plt and the equivalent property in a .pltcfg. Bentley Bentley also provides for you to convert your .plt to .pltcfg. See the following Wiki page - https://communities.bentley.com/products/microstation/microstation_printing/w/wiki/9370/using-microstation-plot-driver-to-create-and-convert-printer-driver-configuration-files

In V8i, the png.plt became obsolete. The wmf.plt became part of printer.pltcfg and the tiff.plt was rewritten in the last version of MicroStation XM now called tiff.pltcfg. The new TIFFDRIVER generates output one scanline at a time, rather than storing the entire plot in memory as LORIP did.

RE: Ploting

mwlong — Tue, 05 Dec 2017 14:28:15 GMT

So which driver are you currently experiencing this issue? Is this driver plotting directly to a printer or is it to create a pdf? If this is a modified driver, have you tried with an unmodified driver to see if you still have the problem?