https://communities.bentley.com/products/microstation/microstation_printing/f/printing-and-plotting-forum/145858/print-organizerI have a pset that I created and used successfully several times. Now a bunch of the DGNs are missing from the pset. I tried creating a new pset with the same list of DGNs I had before and now it isn&#39;t recognizing the fence shape I entered for half ofen-USTelligent Community 12https://communities.bentley.com/thread/443433?ContentTypeID=1Fri, 19 Jan 2018 16:19:29 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:956008aa-fdea-4730-8db6-f4ba2e0344c1Tamara Lynn<p>I specified the reference file this time and it worked! Thank you.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/443307?ContentTypeID=1Thu, 18 Jan 2018 22:17:01 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:58ab0a9b-5f96-43b3-8e6f-53231c12b8bcmwlong<p>I have this at times working on a remote server. It does not happen by opening a working .pset and sheets are missing. It is when I am trying to add files to the set. Are you searching for a shape within the file to place a fence? Check that you are searching for the correct model &amp; view. I also need to define the level, color, style &amp; weight of the shape I am searching for and sometimes I even need to specify the reference file. If your shape is in a reference file make sure the Treat Reference As Element is not set on. At times I&#39;ve had to do this a few times and with no luck then all of a sudden it works.</p><div style="clear:both;"></div>