Odd Print Organizer Behavior

RE: Odd Print Organizer Behavior

Tom Felcone — Thu, 30 Aug 2018 14:27:29 GMT

David,

If you open the dgn file, in plain MicroStation (no InRoads running) do you see the points? We had a problem where InRoads survey was leaving it's temp points\graphics in the file. Everything looked fine as long as we had InRoads Survey running, but when the file was opened on a PC w\o InRoads the points would show up. This was a known problem and Bentley even has a program that would delete all the extra points\graphics. Because PO is running MicroStation in the background if it's not also loading InRoads Survey it's possible these points might display. This was the SS2 version of InRoads Survey

Tom F

RE: Odd Print Organizer Behavior

MaryB — Mon, 20 Aug 2018 16:36:06 GMT

Have you Compressed the file recently? There could be some data bits hanging around that are getting picked up by PO. It sounds strange, but I've seen some strange things in my years.

Try Compressing first, with Print Organizer closed. Compress, save settings, then see how it prints. If that doesn't do it...sometimes, the only "solution" is a workaround. If you want the level not to plot, you can always set the Plot property of the level to off.

RE: Odd Print Organizer Behavior

Bob Rayner — Tue, 14 Aug 2018 21:25:35 GMT

I've had issues (oh, the issues!) with shared cells in connect.