When printed from Microstation version 7 the job does not print on Konicaminolta C458 printer. Kindly advise if there are any known compatibility issues with Konica printer drivers(PCL/PS).
Tried printing directly \\Hostname\printer name/ip address job does not arrive at the printer. But windows test page arrives and prints.
When used Hold release queue \\Servername\printername job is held and visible on the device as Remote downlevel document and when printed nothing comes out of the printer.
Kindly advise if there is any settings to be done on Bentley drivers in order to make this work.
Printing from Microstation version 8 is fine.
Appreciate your assistance.
Hi Mosses,
can you provide more details? Without knowing Windows version do you use and also using what .plt file the print data is created is even not possible to guess what can be wrong.
You should be aware MicroStation/J is very old product, not supported today, and not certified for any current Windows (I guess the latest certified Windows are Windows 2000), so you can expect some level of incompatibilities with new Windows and printers.
With regards,
Jan
Bentley Accredited Developer: iTwin Platform - AssociateLabyrinth Technology | dev.notes() | cad.point
Thanks Jan for the reply, The PC is running windows 10 64 bit and works fine when printed on other printers which were setup few years back.
does microstation printing works only when printed through a print server? or can it be setup to print directly on an IP.
Thanks Jan, Appreciate your inputs.
Thanks Lorys.
Go ahead and set your Windows system printer to that Konicaminolta C458 printer, then use printer.plt. Might work.
Connect r17 10.17.2.61 self-employed-Unpaid Beta tester for Bentley
Tell me more about it. what are the problems?
This thread is nearly two years old. I'm pretty sure they don't have this issue any longer.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2