3D-PDFs created with Connect Edition bigger in file size and slower than with V8i?

Hello community,

since we upgraded to the Connect Edition (CE) the behaviour of 3D-PDFs changed.

Here are the problems we encounter:

Difference in file size for the same model:

  • The file size differs if we create the 3D-PDF with CE or if we create it with V8i.
  • The ones created in CE are always a few MB bigger (depends on the overall size and the complexity of the model).

  • What does CE make different than V8i when creating a 3D-PDF and why is the CE-File always bigger?


Opening time for 3D-PDFs created with CE:

  • If we open the 3D-PDF created with CE, it takes much longer to open and we see a kind of “unfinished render” for about 15-90 seconds.
  • The opening time again depends on the models but it is always much much longer than for the files created with V8i from the same model.
  • We do not see this "unfinished render" in the 3D-PDF created with V8i.

Here is a picture of the "unfinished render":


The interesting thing is: If we create the 3D-PDFs of the exact same model with V8i, they are smaller in file size, they open much faster (in just a few seconds) and we do not see the “unfinished render”.


Interesting Fact: Sometimes the Acrobat Reader changes to “not responding” for a short time, but that is not always the case.

Sometimes the Acrobat Reader even says: “This file cannot be shown with the Acrobat Reader. The program will close now.” (It is not the exact message, I translated it, because I am running a machine which is set to german.)


The "look" of the 3D-PDFs: 

Another thing that I am irritated about is the “look” of the 3D-PDF. The one created with the V8i looks a bit more “shiny” and the one created with CE looks a bit “dull”. We use the same setup for printing the 3D-PDF in V8i and CE. Does anybody have an idea what could cause these differences?

I added two screenshots that show the different looks of the 3D-PDFs. (We imported the print settings from V8i to CE, so they should be the same for both versions).

Screenshots:

(As an example file we just put together some random pipelineworks.)

3D-PDF created with CE (looks a bit dull and not as "shiny" as the one created with V8i).

3D-PDF created with V8i (looks a bit more "shiny" than the one created with CE).


Example Files:

The example files are just a bunch of pipelines thrown together randomly, as we can not show you real projects. 

To see the effects described above it is important that the files have a certain amount of equipment in them, otherwise the difference in loading times is to short to see. That is why the files are relatively big and we had to upload the to the WeTransfer Page.

Here you can find two 3D-PDFs and the DGN file they where both created from, one time using Connect Edition, the other one using V8i.

https://we.tl/t-uPt2bxGlNe

Parents
  • Wir haben das selbe Problem. 

    Leider habe ich die v8i in eine open building designer Lizenz getauscht, heisst ich kann nicht einfach über die v8i drucken. Disappointed

    gibt es keine andere Lösung? Denn bei mir stürzt Adobe ab, er bekommt die 3d-PDF erst gar nicht auf.

  • Leider wurde bis jetzt keine andere Lösung gefunden. Es liefen bereits verschiedene Service-Requests zu dem Thema und einer wird gerade wieder aktuell verfolgt. Das ist der Service-Request mit der Nummer: SrvReqNo:[7000972269]. Service Request läuft beim englischsprachigen Support, da der deutschsprachige Support auch nicht wirklich weiter wusste und die Probleme nicht richtig nachvollziehen konnte. (Der letzte deutschsprachige SR war der mit der Nummer: SrvReqNo:[7000963540].


    Im aktuellen SR (7000972269) habe ich letzte Woche den Hinweis erhalten, dass ich bitte mal meine Drucker-Treiber-Einstellungen prüfen und anpassen soll. Es sollte zum einen die Präzision auf "Standard" gestellt werden und die Drucker-Auflösung auf "x=300 dpi" und "y=300 dpi". (Wir haben im Normalfall dort eine Auflösung von 600, 600 eingestellt.) 
    Vielleicht können Sie diese Einstellungen einmal bei Ihnen testen, bei mir haben sie keine Verbesserung gebracht. 

    (Sie finden die Drucker-Treiber-Einstellungen im Druckdialog oben links unter der Schaltfläche "Datei".) 

    Anbei noch die beiden Screenshots die ich vom Support bezüglich der zu testenden Einstellungen erhalten habe: 

    -------------------------------------------

    Currently using:

    OpenPlant Modeler - Version: 10.09.00.74

    [MicroStation - Version: 10.14.02.01]

  • Hello, Mr. Schilling,
    are there any new findings? Because if you are only allowed to use the Connect Edition and have relatively large building structures, the "no longer" ability to print in a 3D PDF is a significant cut.

    Even our customers asked why we no longer send 3D-PDFs - to be able to discuss upcoming topics faster.

    Greeting

    Edit: I have now contacted the support, too.

    Hallo Herr Schilling,
    gibt es neue Erkenntnisse? Denn wenn man nur noch die Connect Edition benutzen darf und relativ große GebäudeStrukturen hat ist das "nicht mehr" drucken können in eine 3D-PDF ein erheblicher Einschnitt.
    Selbst unsere Kunden fragten, an wieso wir keine 3D-PDFs mehr senden - um anstehende Themen schneller besprechen zu können.

    Gruß

    Edit: ich hab jetzt auch den Support kontaktiert

  • I'm a little bit further now, it must be attached references, because if I print the files into a 3D-PDF on my own, it works, slower than with the V8i but the PDF opens afterwards, it also loads a tick longer than the same one created from the V8i.


    but as soon as I make a reference that should be in the model, it breaks down, i.e. we have an existing model of a building in which we build a stage,...
    here it is independent if I reference files or
    Models from the same file - this makes no difference!
    the result is always the same - a PDF that cannot be used


    Ich bin jetzt einen kleinen Schritt weiter, es muss an angehängte Referenzen liegen, denn wenn ich die Dateien für sich alleine in eine 3D-PDF drucke, funktioniert es, zwar langsamer als bei der V8i aber die PDF geht anschließend auf, auch die läd einen Ticken länger als die gleiche die aus der V8i erzeugt wurde.


    sobald ich aber eine Referenz an mache die mit im Modell sein sollen bricht er zusammen, Sprich wir haben ein Bestandsmodell von einem Gebäude in dem wir eine Bühne einbauen,....
    hier ist es unabhängig ob ich Dateien referenziere oder
    Modelle aus der selben Datei - dies macht keinen unterschied!
    der Ergebnis ist immer das Selbe  - eine nicht zu gebrauchende PDF.

  • Hallo Herr Österreicher, 
    vielen Dank für die Erläuterung. 
    Ich hatte bisher auch immer das Gefühl, dass insbesondere Referenzen beim 3D-PDF-Druck aus der CE anders gehandhabt werden als vorher. Ihre Beobachtung scheint das zu bestätigen.

    Es hat sicher leider bis jetzt nichts neues ergeben. Ein Service Request dazu ist noch offen, dort ist aber seit längerer Zeit nichts passiert.
    Wir arbeiten im Moment weiter mit dem Umweg über die V8i. Das ist wirklich schlecht, allerdings fehlte die Zeit sich wieder intensiver mit dem Problem auseinander zu setzen und solange haben wir uns gesagt, leben wir mit dem Workaround. 


    Mir fällt übrigens gerade auf, dass wir uns seit einigen Posts im englischsprachigen Forum auf Deutsch unterhalten. Wir sollten für weitere Posts wieder aufs Englische zurück gehen, damit auch internationale Leser den Thread nachvollziehen können. 

    -------------------------------------------

    Currently using:

    OpenPlant Modeler - Version: 10.09.00.74

    [MicroStation - Version: 10.14.02.01]

  • Hello, Mr. Schilling,
    I am also in the support right now, I had also referred to this thread. Now it came out until he sent me a video - that the "support-person" where everything works perfectly,  unfortunately 3D was disabled in the PDF.
    so each of the created files opened immediately and without problems!
    but that's not the point of a 3d pdf, you want to move around in it - otherwise i could print a rastered isometric view.

    that's what i pointed out now - let's see what comes.

    you are right, but unfortunately my english is not as good as yours, so i had the most important posts translated by me via deepl-translator and changed them accordingly.

    Hallo Herr Schilling,
    ich bin mit dem Support auch gerade dran, ich hatte zudem auf diesen Thread verwiesen. Nun kam raus das beim "supportler" alles tadellos funktioniert, bis er mir ein Video geschickt hat, tja leider war 3D in der PDF deaktiviert, somit ging jeder der erzeugten Dateien unverzüglich und ohne probleme auf!
    nur das ist ja nicht der sinn einer 3d pdf, man möchte sich ja drin bewegen - denn sonst könnte ich auch eine gerastert isometrische ansicht drucken.

    darauf hab ich nun hingewiesen - mal schauen was kommt.

    Sie haben recht, nur ist leider mein Englisch nicht so gut wie ihres, daher habe ich die wichtigsten posts von mir via deepl übersetzen lassen und entsprechend geändert.

  • Try no. 2 my previous message was declared as spam

    Hello, Mr. Schilling,
    I am also in the support right now, I had also referred to this thread. Now it came out until he sent me a video - that the "support-person" where everything works perfectly,  unfortunately 3D was disabled in the PDF.
    so each of the created files opened immediately and without problems!
    but that's not the point of a 3d pdf, you want to move around in it - otherwise i could print a rastered isometric view.

    that's what i pointed out now - let's see what comes.

    you are right, but unfortunately my english is not as good as yours, so i had the most important posts translated by me via deepl-translator and changed them accordingly.

Reply
  • Try no. 2 my previous message was declared as spam

    Hello, Mr. Schilling,
    I am also in the support right now, I had also referred to this thread. Now it came out until he sent me a video - that the "support-person" where everything works perfectly,  unfortunately 3D was disabled in the PDF.
    so each of the created files opened immediately and without problems!
    but that's not the point of a 3d pdf, you want to move around in it - otherwise i could print a rastered isometric view.

    that's what i pointed out now - let's see what comes.

    you are right, but unfortunately my english is not as good as yours, so i had the most important posts translated by me via deepl-translator and changed them accordingly.

Children
No Data