Hello,
We switched from Bentley MicroStation v8i to latest CONNECT Edition, and now we can't use plotter since we always get error.
On older version everything was working fine but now we can't print with windows driver or any other bentley driver.
Plotter is installed on printserver (HP DesignJet 500) and we can print from any other application normaly.
We have tried to reconfigure pltcfg files by inserting \\printsever\printer and //printserver/printer on all existing drivers (<DefaultPrintFileName>$(MS_PLTFILES)$(basename(_DGNFILE))-$(MS_PLTMODELNAME)-<autoInc?digits=3?base=0></DefaultPrintFileName>) and we allways get error creating print file.
Any suggestions what we could do?
I have the same problem with the same device (DesignJet 500). It doesn't work on Connect Edition. Other printers in my office works fine. Do You solve the problem?
It looks as if they had some concern about JetDirect (instead of HPGL2). That is certainly something you could look into.
A workaround might be to print to PDF, and then send the PDF to the printer.
MaryB
Power GeoPak 08.11.09.918Power InRoads 08.11.09.918OpenRoads Designer 2021 R2