I am using the Home Use Version of Microstation 95 that I received before I retired.
It has worked very well over the past many years .
Recently my HP Designjet 70 rolled over dead and I replaced it with an HPT125.
My problem is that the plots I generate for a 24x18 output are cut off. The print/plot preview shows the full drawing with proper size, borders, etc. but the actual plot is only the lower half of the drawing at the top of the page.
I did not have this problem with the Designjet 70.
Can anyone offer advise on how to resolve the problem?
On Mar 10, 2020, at 1:01 PM, MaryB <bounce-c6d6be63-61c9-4e82-8b2b-2e2ead5ec584@communities.bentley.com> wrote:
<Bentley_5F00_Communities_5F00_RGB_5F00_Stacked_5F00_244x88-png_2D00_125x44-png> Update from Bentley Communities <4TFHLUYLTDOK-jpg_2D00_70x70x2-jpg> MaryB Would you be able to post it here so folks could look through it? I don't know if there's much to be seen, but it's worth a shot.Do all your other software applications print to it alright? View online You received this notification because you subscribed to the forum. To unsubscribe from only this thread, go here. Flag this post as spam/abuse.
Would you be able to post it here so folks could look through it? I don't know if there's much to be seen, but it's worth a shot.Do all your other software applications print to it alright?
View online
You received this notification because you subscribed to the forum. To unsubscribe from only this thread, go here.
Flag this post as spam/abuse.
Another alternative print to pdf first then open the pdf and print to the HPT125 through the windows printer. we do this all the time give a better chance to spot errors with pdf reader before plot to paper and the windows driver works great with pdfs.. but you do have to set the settings in the pdf.plt and save them but its such a long time ago for me to remember the idiosyncrasies of ustn 95
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me