Does anyone know the limit on the number of files that can be added to the print organiser? I have had no problem using it to print 400+ .dgn files to a single pdf however at the moment I am trying to do the same with just shy of 4000 dgns and they wont even add to the definitions list. Im assuming its due to the large quantity.
Any help greatly appreciated
What software are you using? Which version of the software?
I don't know that there is a documented limit (I haven't found one but i'm not expert) but 4000 drawings does sound excessive. I know plan sets can get to be that large...but for plotting, I believe you will have to break that up into sections.
Microstation 08.11.09.829Power GeoPak 08.11.09.878Power InRoads 08.11.07.615
I'm using Microstation V8i (SELECTseries 4).
Makes sense to break up into sections and perhaps combined the PDF afterwards
Try modifying this configuration variable...
MS_PLT_AUTOAREA_RESULT_LIMIT - defines the maximum number of print definitions to be created when searching for multiple shapes or cells. The default limit is 500.
I have tried changing that variable but it has no effect
I have tried this also, didn't work in my case either. Any other suggestions on how to change the limit?