Print Size Error

Question

Using Print Organizer, when attempting to add a particular file, the following message appears. 
 
 I have defined Print Styles that searches a reference file to apply a fence shape according to color and weight of the shape. Issue is specific to this one particular design file. 
 Anybody have any ideas? 
 
 Microstation V8i (Select Series 2) - Version 08.11.07.443 
 
 Thanks, 
 Terry

Lorys · Answer

since your using v8iss2 try going back to using batchplt.ma the old batch plot routine works pretty flawlessly but is not available in CE, I think its hidden from the pull downs as Bentley wantd you to use the Print organiser instead.. but I find the old batchplot mdl works even better and faster than pre v8i and much faster than print organiser. 
 It looks similar to print organiser and lets you save a named print batchplot job file so you can use it just like organiser... give it a try you got nothing to loose you just have to make sure you got right the model name or if you use sheet models , set to filter it so you can delete the non required models.. pm me if you have difficulty and I'll help you through some screen shots...real shame Bentley removed the old batchplt.ma it from CE as you have no fall back position when organiser fails... 
 I use this keyin to load it from my F12 key 
 mdl load batchplt

Lorys · Answer

Terry Dupuy said: I upgraded Microstation to 08.11.09.916 
 Hi Terry thats still v8i SS10 so you can still use the old batch plot mdl its just hidden and only works from the keyin to bring up the tool, you'll find it much faster than print organiser ... but is not available at all in CE ... if your using sheet models for printing then print organiser is very easy...with batch plot you have to filter out the non sheet models