I am trying to use level overrides on a reference file to get it to plot correctly. There are linestyles in the reference that are at the wrong scale, and the wrong lineweight, so I am trying to use overrides to correct both of those. Both the scale and weight overrides appear correctly on my screen. The problem, however, is that the lineweight override does not plot. The scale override plots correctly, but the lineweight does not. Can someone walk me through how to fix this? I am using IPlot on microstation V8i (SS10) version 08.11.09.916. I have attached a simple file to show what i am talking about. There are 3 pictures in the file. The first pic is a microstation screenshot of 3 lines as they show up in the reference. The second pic is a microstation screenshot of the 3 lines with scale and weight overrides turned on. The third pic is a plot showing how the scale override plotted correctly but the weight override did not.
/cfs-file/__key/communityserver-discussions-components-files/19568/override-plotting.docx
Hi Eric,
Are you using a pen table to plot with? If so, in the advanced options, there is a toggle to switch between how the element is shown on the screen vs the element header. The element header option does not consider display/level overrides.
--Robert
I am using a pen table yes. It is through Iplot. I don't know very much about plotting though. Can you tell me how to get the advanced options?
thanks
I don't know anything about IPLOT. Perhaps someone else can chime in...
ok hopefully someone can. thanks for the response