10.16.2.34
I am trying to create a .pset from the Sheet Index. I have Print Styles setup but, I am not able to select a paper size. I have a Print Style setup to use ANSI D & one to use ANSI B but, it does not matter which style I select the ANSI B is used. Is it because ANSI B is set as the default paper size in the .pltcfg?
Is there any way to change the paper size after the .pset is developed?
mwlong said:Is there any way to change the paper size after the .pset is developed?
The Printing & Plotting Forum would be a good place to post that question.
Regards, Jon Summers LA Solutions
Jon Summers said:The Printing & Plotting Forum would be a good place to post that question.
Yes, that is true. I do not have the option to move it to that forum.
Rod Wing said:Since you can only have one Sheet Index per WorkSet it might take some creating thinking to work around that.
The sheets are defined as ANSI D. The plot driver is set to have ANSI B as the default paper size. This forces the pset to use the ANSI B paper size. I created a new driver and have only ANSI D defined. I have an ANSI B one created as well. If I create a .pset with the ANSI D driver but, if I want to create an ANSI B set I can just open the .pset, switch the plot driver to ANSI B and print the set. The sheets will scale properly.
That is the workaround at the moment.
Microstation CONNECT 10.17.00.209
ORD CONNECT 2021 R1 10.10.1.3
Microstation v8i SS 10 08.11.09.919
Power InRoads v8i 08.11.09.615
ProjectWise 10.0.3.453