Print Configuration

I'm trying to understand the printing setup.  We have working on plans for a client using their level setup.  The client provided us with the information below to print. I'm uncertain how to set this up for use with the plans.  Guidance would be apricated.

S = W / 25R
where: S = # of strokes in weight strokes statement of driver
W = desired width of line in millimeters
R = resolution of plotter in inches in resolution statement
#####################################
;A-size 1200dpi (0.021 - 1.6 mm)
weight_stroke=(1,1,2,4,5,6,7,8,10,11,12,13,14,17,19,22,24,26,29,32,36,40,43,47,50,54,58,61,65,68,72,76)
;B-size 1200dpi (0.042 - 3.2 mm)
weight_stroke=(1,2,5,7,10,12,14,17,19,22,24,26,29,34,38,43,48,53,58,65,72,79,86,94,101,108,115,122,130,137,144,151)
;D-size 1200dpi (0.084 - 5.4 mm)
weight_stroke=(1,5,10,14,19,24,29,34,38,43,48,53,58,67,77,86,96,106,115,130,144,158,173,187,202,216,230,245,255,255,255,255)
;1200 dpi
resolution(IN)=(0.00083333,0.00083333)
style(1) = (14,42)/nohardware
style(2) = (70,42)/nohardware
style(3) = (168,56)/nohardware
style(4) = (112,42,28,42)/nohardware
style(5) = (56,56)/nohardware
style(6) = (84,28,28,28,28,28)/nohardware
style(7) = (112,28,56,28)/nohardware
#####################################
;A-size 600dpi (0.042 - 1.6 mm)
weight_strokes=(1,1,1,2,2,3,4,4,5,5,6,7,7,8,10,11,12,13,14,16,18,20,22,23,25,27,29,31,32,34,36,38)
;B-size 600dpi (0.042 - 3.2 mm)
weight_strokes=(1,1,2,4,5,6,7,8,10,11,12,13,14,17,19,22,24,26,29,32,36,40,43,47,50,54,58,61,65,68,72,76)
;D-size 600dpi (0.084 - 5.4 mm)
weight_stroke=(1,2,5,7,10,12,14,17,19,22,24,26,29,34,38,43,48,53,58,65,72,79,86,94,101,108,115,122,130,137,144,151)
;600 DPI
resolution(IN)=(0.0016666,0.0016666)
style(1) = (7,21)/nohardware
style(2) = (35,21)/nohardware
style(3) = (84,28)/nohardware
style(4) = (66,21,14,21)/nohardware
style(5) = (28,28)/nohardware
style(6) = (42,14,14,14,14,14)/nohardware
style(7) = (60,14,28,14)/nohardware
#####################################
;A-size 300dpi (0.085 - 1.6 mm)
weight_strokes=(0,0,1,1,1,2,2,2,2,3,3,3,4,4,5,5,6,7,7,8,9,10,11,12,13,14,14,15,16,17,18,19)
;B-size 300dpi (0.085 - 3.2 mm)
weight_strokes=(0,1,1,2,2,3,4,4,5,5,6,7,7,8,10,11,12,13,14,16,18,20,22,23,25,27,29,31,32,34,36,38)
;D-size 300dpi (0.085 - 3.2 mm)
weight_strokes=(0,1,2,4,5,6,7,8,10,11,12,13,14,17,19,22,24,26,29,32,36,40,43,47,50,54,58,61,65,68,72,76)
;300 DPI
resolution(IN)=(0.0033333,0.0033333)
style(1) = (4,11)/nohardware
style(2) = (18,11)/nohardware
style(3) = (42,14)/nohardware
style(4) = (33,11,7,11)/nohardware
style(5) = (14,14)/nohardware
style(6) = (21,7,7,7,7,7)/nohardware
style(7) = (30,7,14,7)/nohardware
#####################################

NOTE: 0 strokes produces a line of minimum width. On some plotters
this results in a thinner line than the plotter resolution
would indicate (ie. thinner than one stroke).
Resulting line widths (mm)
Ustation A-size B-size D-size
Weight plot plot plot
-------- ------ ------ ------
1 .025 .05 .1
2 .05 .1 .2
3 .075 .15 .3
4 .1 .2 .4
5 .125 .25 .5
6 .15 .3 .6
7 .175 .35 .7
8 .2 .4 .8
9 .225 .45 .9
10 .25 .5 1.0
11 .275 .55 1.1
12 .3 .6 1.2
13 .35 .7 1.4
14 .4 .8 1.6
15 .45 .9 1.8
16 .5 1.0 2.0
17 .55 1.1 2.2
18 .6 1.2 2.4
19 .675 1.35 2.7
20 .75 1.5 3.0
21 .825 1.65 3.3
22 .9 1.8 3.6
23 0.975 1.95 3.9
24 1.05 2.1 4.2
25 1.125 2.25 4.5
26 1.2 2.4 4.8
27 1.275 2.55 5.1
28 1.35 2.7 5.4
29 1.425 2.85 5.7
30 1.5 3.0 6.0
31 1.575 3.15 6.3

Power Geopak (SS10)

v08.11.09.918