Hi,
I have some sheets, with some sheet models.when I try to print, the sheet boundary is not recognized,it is grayed out in the printerdialogbox
the models are all defined as sheetshow to make the sheet boundary to be regognized by the pltcfg
OBD u9.2
regards Rik
For the area field, you need to set this to Sheet rather than View. This tells the Print utility to look at the Sheet model. View looks at the current view of the active window.
Microstation CONNECT - 10.17.2.61
ORD - 2021 R1 10.10.1.3
ORD 2022 R1.1 - 10.11.3.2
ORD 2022 R3 - 10.12.2.4
Microstation v8i SS 10 - 08.11.09.919
Power InRoads v8i - 08.11.09.615
ProjectWise - 10.0.3.453