When going to print my pdf the reference break, go missing and don't show colour. Colour is on because it can be seen at the bottom.
Version: Microstation V8. References are saves by 'saved view'. Never had an issue till now.
Please help. Left is what is drawn & right is what the pdf comes out as.
Hi Absta,
Thanks for the additional info. Would it be possible to post the files you are working with so we can analyze more in-depth? You can also file a Service Request through the Service Request Manager if you would like to work one-on-one with a MicroStation support analyst.
in the level manager there are tabs across the top line/ bar you can add the print option or add more via rmb on the bar then you can see if specific level is barred or locked from no print or print tick on or tick off, also check what level the fill is also if imported from acad it might not be a fill at all but a very dense pattern check the properties of the red fill....
Try delete the fill at the source and rebuild the fill on a new level.. see if that fixes things
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
Hey,
Yea i've had a play with the print dialog & attributes but unfortunately no luck.
I've used dynamic views on microstation for years with no issue before.
But thank you for your reply :)
A
Hey Lorys,
Fill is kept on once printing to pdf. No custom pdf, other documents are fine it's just this one.
Don't know how to check what levels are unprintable? Level manager doesn't show anything neither does the references. I think it might be the actual drawing as it was imported in from a client but me nor people in my office have come across this issue before.
Attributes are fine, thank you for your reply though
Hi Absta, Thanks for the post.If you are experiencing troubles with printing your drawings, toggling on the Rasterized option within the Print dialog is a good "catch-all" solution.
Based on your screenshot, it looks like you are potentially working with Dynamic Views. You can read more about printing Dynamic Views in the following Wiki article:communities.bentley.com/.../printing-dynamic-views-what-works-what-does-not