Print Organizer and Custom Linestyles

I cannot print custom linestyles via print organizer from a custom interface - custom linestyles print as solid lines.  We have both SS2 and SS3u1 installed under both XP and Windows 7.  MicroStation is started with comand line switches for workspace and user: -wsXXX and -wuXXX.

 

This issue seems to be the same as or related to the issue discussed in this thread started in 2009 and remaining unresolved as of January, 2012:

http://communities.bentley.com/products/microstation/microstation_v8i/f/19568/p/19658/63562.aspx#63562

 

Any help or insight into this issue would be greatly appreciated.

 

TIA

Bill

Parents
  • Hello Bill,

    I checked the TR and CR mentioned in the thread you referenced and they are both closed. There was a note in TR 262657 that might help you.

    NOTE: If the primary ustation.exe command line has other customizations, for example "-wsCUSTOM -wrc:/Temp", then those arguments must be mirrored in MS_PLT_ENGINE_CMDLINE_ARGS in order for Print Organizer's worker process to be launched correctly. That is, "MS_PLT_ENGINE_CMDLINE_ARGS = -wsCUSTOM -wrC:/Temp"

    I hope this helps! If not, please log a service ticket with support.

    Regards,

    Jo Terri


    This is a test

Reply
  • Hello Bill,

    I checked the TR and CR mentioned in the thread you referenced and they are both closed. There was a note in TR 262657 that might help you.

    NOTE: If the primary ustation.exe command line has other customizations, for example "-wsCUSTOM -wrc:/Temp", then those arguments must be mirrored in MS_PLT_ENGINE_CMDLINE_ARGS in order for Print Organizer's worker process to be launched correctly. That is, "MS_PLT_ENGINE_CMDLINE_ARGS = -wsCUSTOM -wrC:/Temp"

    I hope this helps! If not, please log a service ticket with support.

    Regards,

    Jo Terri


    This is a test

Children