[V8i SS2] Print Organizer omitting raster images

So this issue just recently started occurring and I have tried many different thing to try and remedy it.  If I print from the normal print dialog I get a perfect print, but when I setup the exact same print for 20+ documents then I end up with no rasters in my .pdf's.  It is very frustrating because the alternative is extremely time consuming to do printing them one at a time to individual files and then combining them.

I am printing with print organizer having it find shapes by layer for the fence for each sheet each sheet and in the advanced pane I have print raster images checked.  I also validated that the print option is selected of each image in the raster manager.

 

Any idea?

Thanks, Matt

I can post my .pset file or some pictures if that would help

Parents
  • The problem is the fence you have defined.  How are you defining the plot area?   I don't have your print style to look at, but if I modify the Fence in the Print Defintion tab and set Fit to master model or Fit to master model and all reference files, I get the raster on the plot.



  • Unknown said:

    The problem is the fence you have defined.  How are you defining the plot area?   I don't have your print style to look at, but if I modify the Fence in the Print Defintion tab and set Fit to master model or Fit to master model and all reference files, I get the raster on the plot.

    Here is a picture:

    I am defining my print area from the level I defined around the border sheet.  On my actual print I have 20 rasters in one dgn

    and each has a block to define the fence.  I have also had this same issue when using seperate dgn files.

     

    EDIT: I apologize. I accidentally clicked the cell option instead of shape when I uploaded that picture.  It is defined by a shape with the level "PLOT_BDR"

Reply
  • Unknown said:

    The problem is the fence you have defined.  How are you defining the plot area?   I don't have your print style to look at, but if I modify the Fence in the Print Defintion tab and set Fit to master model or Fit to master model and all reference files, I get the raster on the plot.

    Here is a picture:

    I am defining my print area from the level I defined around the border sheet.  On my actual print I have 20 rasters in one dgn

    and each has a block to define the fence.  I have also had this same issue when using seperate dgn files.

     

    EDIT: I apologize. I accidentally clicked the cell option instead of shape when I uploaded that picture.  It is defined by a shape with the level "PLOT_BDR"

Children