Hi,
One of my colleagues has a very perculiar printing problem.
If you take a look at the attached pdf, when he opens this specific .dgn file and clicks print, the text shows with this strange character instead of the correct one (3). If he then leaves his print dialogue box open and prints again, it prints correctly as per page 2 of the PDF. Does anyone have any idea as to why this is happening??
delete all of the faulty text that has the / in it ...
copy some ok text and edit it to replace the bad text and it should go away...
Lorys
Started msnt work 1990 - Retired Nov 2022 ( oh boy am I old )
But was long time user V8iss10 (8.11.09.919) dabbler CE update 16 (10.16.00.80)
MicroStation user since 1990 Melbourne Australia.click link to PM me
I would like to know what is causing it rather than just doing that though. What if i had 1000s of drawings with the same error on?
owens_2k, I can not reproduce this issue on my side either. I have tested MicroStation 8.9.4.88 on Win XP. Sounds like one machine specific.
Worth to try PDF print driver from working machine in faulting machine.
I see the original file format was DGN V7.