Getting an error when attempting to select a modified printer.pltcfg plot driver file (delivered with MicroStation 8.9.3.48) from a network share.


	Applies To

	Product(s):	MICROSTATION
	Version(s):	08.09.03.48
	Environment:	N\A
	Area:	Print/Plot
	Subarea:	N\A
	Original Author:	Marion Powell, Bentley Technical Support Group

Problem

There is no mdl driver application specified - User getting the following error when attempting to select a modified printer.pltcfg plot driver file (delivered with MicroStation 8.9.3.48) from a network share:
"There is no mdl driver application specified in the .plt file (printer.pltcfg). The driver= line was optional in previous version but
is now required."
Version: 08.09.03.48
Product: MicroStation

Solution

End-user must run MicroStation 8.9.3.x or higher - User was running MicroStation 8.9.2.77 trying to access a .pltcfg file on a network share generated from MicroStation 8.9.3.48 . *.pltcfg files did not exist in versions of MicroStation prior to 8.9.3.x.

Created by marion powell
When: Tue, May 6 2014 4:16 PM
Last revision by Greg Campbell
When: Tue, May 6 2014 5:26 PM
Revisions: 2
Comments: 0

Recommended