LumenRT - solar reflection on ground

I have a scene with a mapped ground layer.

For some reason, the sun reflects off this surface - even though it has no reflective or specular material attributes.

Is there any way I can switch the sun's visibility off (while retaining its presence for lighting and shadows)? Are there other material attributes I need to adjust?

I don't recall this happening in previous versions of LumenRT.

Thanks,

Max

LumenRT 16.14.60.67

Parents
  • Is this video visible in my post? I click on it and it disappears.

  • Trying again to "Insert video" from the post editor - Bentley, please fix this if it's a bug in your Bentley Communiites posting editor.

  • Thanks Ron, much appreciated!

    It would be useful if your gold nugget of information could be more prominently communicated by Bentley. I recall something about recommended formats many years ago by Phil Chouinard and spent half an hour trying to find it.

    Here goes my attempt at inserting the .mp4;

  • Hi Max,

    Just an hypothesis - This might be a sun flare, you may check the camera settings, sun flare, to see if artifact respond to this setting

    Vincent RAULT [Bentley]



  • Thanks for your suggestion, Vincent. I did try changing Sun Flare's Strength and Size settings, with no change. I tried all other settings in the Rendering options too.

    A solution would be to move the sun - but I can't do that because later in the video it needs to coincide with shadow positions on the ground.

    All other suggestions welcome!

    Max

  • even though it has no reflective or specular material attributes

    Is this comment based only on the MicroStation material settings, or have you also checked the specular and reflective settings of that materials inside LumenRT too? 

    It appears to be a reflection or specular highlight rather than a lens flare because it is very noticeably on the ground as it crosses the intersection.

    I would check the LumenRT material settings and make sure the Type is Standard and the Specular values are zero.

  • That could be Ron but it looks like Max is using update 14 then the materials are going to be PBR.

    Max, try setting Roughness to 100 % for that material. If that does not help let me know, I might need your test case to investigate further.

    Cheers,

    Jerry

Reply Children