Assigning Materials to Parametric Cells

The new Parametric cells when placed in a design, don't seem to be able to accept byLevel:Colour material assignments. This may have something to do with the cells definition being a bit like a shared cell. And the instance sitting on the default level???

If I pre-define materials, and pre-assign them in the cell itself, then materials are respected when placed in a design - but this workflow isn't all that useful if I want to test out a couple of different materials in the placed design.

Am I missing something obvious?

Regards

Robert

Parents
  • Hi Robert, we are working on some changes that will have parametric cells support bylevel symbology, including materials. The cell will place with all its elements on the same levels as in its definition model and you will be bale to toggle elements on/off via their levels and the whole cell by toggling the level this has been placed on on/off.

    You can assign a material to the cell levels in the definition model and then use the "attached material" property together with override symbology (set to no material) to see how other materials could play in a design.

    Marco Salino

    Product Manager, MicroStation

    Bentley Systems intl

    www.bentley.com

    Answer Verified By: Robert Jones 

Reply
  • Hi Robert, we are working on some changes that will have parametric cells support bylevel symbology, including materials. The cell will place with all its elements on the same levels as in its definition model and you will be bale to toggle elements on/off via their levels and the whole cell by toggling the level this has been placed on on/off.

    You can assign a material to the cell levels in the definition model and then use the "attached material" property together with override symbology (set to no material) to see how other materials could play in a design.

    Marco Salino

    Product Manager, MicroStation

    Bentley Systems intl

    www.bentley.com

    Answer Verified By: Robert Jones 

Children