Hi all,
I am working on the 2020 R3 version of OpenRoads Designer and LumenRT Designer version 14.
I am trying to implement road railings to LumenRT as 3d lines. I am using built-in linestyle Guardrail Flared End. I also created some new 3d lines (yellow railings you can see on the image).
The problem is, none of them is shown in LumenRT. They are not listed in layers as well.
The road is approx. 12 km long. Could that be the problem? Or where should i find it? Does anybody knows where should I look for the solution?
Regards
Update:
LumenRT also don't want to refresh all the files every time. I understand that that would be time consuming, but in example here it looks to remember some old solution to the terrain model. I changed the interior boundaries in the terrain model shown in Microstation below:
and in LumenRT it is shown like it was previously (I mean left road is not included in interior boundary):
I tried to change name of the model file, nothing changed.
Can anybody help me ?
Hello Daniel,
What exactly you want in the above model?
Please can you highlight the area which is not coming inside LumenRT?
Thanks.
Rg,
Ankur Ashesh
Hi,
I also tried this, with no success. I see only one or two short guardrails on the whole model.
Can you send us your file so we can take a look.
Thanks
Paul
I send the file with guardrails I use. I also attach file with my 3d lines, which were shown at first post.
I can't upload them here. Here is a link to wetransfer:
https://we.tl/t-TletwZwv6a
I took a look at your file, processing 3d linestyles is something we will have to add to the lumenRT exporter.
Daniel
I have seen the same issue... My workaround is to zoom up in ORD in an area where the 3D Linestyle is located then export that view into LumenRT. That seems to fix it... Hopefully will be fixed by Bentley in update 16...
Ross