You are currently reviewing an older revision of this page.
This article lists the most commonly used HewlettPackard (HP) printers/plotters and the MicroStation plotter driver to use to produce the best results.
The following tables list commonly used HewlettPackard (HP) printers/plotters and the MicroStation plotter driver to use to produce the best printing/plotting results. See note at bottom for printing/plotting images. Note: PRINTER.PLT may be used to access the installed Windows system printer/plotter drivers under any Windows platform running MicroStation 95 or MicroStation SE and the Macintosh platform running MicroStation 95 or MicroStation V5.
HP DesignJet Plotters See Legend below
Model
HPDJET.plt
HP650C.plt
PS650C.plt
PSC650C.plt
HPGLRTL.plt
200
M 1
C 3
-
C 1
220
230
250C
330
350C
430
450C
455CA
600
650C
M 2
C 2
700
C 2,3
750C
755C
2000CP
2500CP
HP LaserJet Printers See Legend below
HPLJET4V.plt
HPPCL5.plt
PSCRIPT.plt
PSCRIPTC.plt
LaserJet 4MV
LaserJet 4V
LaserJet 5
LaserJet 5M
LaserJet 5N
LaserJet 5L
LaserJet 5L-FS
LaserJet 5P
LaserJet 5MP
LaserJet 5Se
LaserJet 5Si
LaserJet 5Si MX
LaserJet 5Si NX
Color LaserJet 5
Color LaserJet 5M
LaserJet 6L
LaserJet 6LSe
LaserJet 6Lxi
LaserJet 6MP
LaserJet 6P
LaserJet 6PSe
LaserJet 6Pxi
LaserJet 4000
LaserJet 4000T
LaserJet 4000N
LaserJet 4000TN
LEGEND
1 = Driver may be used for this device. 2 = May be used if PostScript option is installed on printer. 3 = May be used for plotting gray scale only, not full color. M = Drivers for monochrome plotting. C = Drivers for color/gray scale plotting.
Image Plotting When plotting images, use the HPGLRTL.plt for best results and plot files smaller than those created with HPGL2 drivers. PostScript drivers (PS650C.plt, PSC650C.plt, PSCRIPT.plt, PSCRIPTC.plt) also give quality image output, but can create large plot files. These files are not limited to just image plotting, as they will plot vector data with high quality also. HPGL2 drivers (HPDJET.plt and HP650C.plt) plot vector data very well, but images plotted with the HPGL2 drivers will be grainy and may result in large plot files. HPLJET4V.plt and HPPCL5.plt will produce quality image output. Note: Images will not plot correctly with any driver unless the "hardware_raster/resolution=300" line in the .plt file is un commented. This is done by removing the semi-colon (;) at the beginning of the line. The wording of this line may vary slightly in some files (i.e. "software_raster/resolution=32").
AskInga Article # 20