You are currently reviewing an older revision of this page.
Produkt(e):
MicroStation
Version(en):
V8i ud CONNECT Edition
Umgebung:
N/A
Produktbereich:
Zeichenhilfen
Produktunterbereich:
Fangfunktionen
Problem
Wie kann man die Funktion/Tastatureingabe "construct perpendicular to" verwenden?
Problemlösung
Die Steuerungstaste und Umschaltaste ermöglichen, dass mit dem Tool Accusnap für die Platzierung des Elements verwendet wird
Sehen Sie hierzu auch
https://communities.bentley.com/communities/other_communities/askinga/w/askinga/how-to-draw-a-line-perpendicular-to-an-arc-at-a-specific-point.aspx
Englischsprachige Quelle
https://communities.bentley.com/products/microstation/w/microstation__wiki/14518/using-construct-perpendicular-to-tool
Using "construct perpendicular to" tool.
1. Set snap mode to nearest2..Keyin 'construct perpendicular to'3. Select first element i.e. select a line4. Hit and hold the Ctrl+Shift keys5. Select second element i.e. parallel lineThe Ctrl+Shift allows the tool to use accusnap for element placement