How to set the transparency of specific levels in a master file as wellas in a (nested) reference file to a specific value, using a key-in.
Preparation:Editing of (nested) reference levels in the master file must be allowed:Key in:set refleveloverrides onAs that is a file specific setting, make it permanent by using:File>Save SettingsVariables:MS_LEVEL_EDIT_NESTED_ATTACHMENT_LEVELS = 1MS_LEVEL_LOAD_ATTACHMENT_FILTERS = 1The general format for the keyin is:level set transparency new-level-transparency [file:file-spec]level-specHaving the above conditions set/met, in the example below it is assumedthat the levels to be affected in the (nested) references end with thename: _ins (like: insulation, often used in AutoPlant files). To thoselevels a transparency value: 50 needs to be applied.The following keyins can be entered.Master file:level set transparency 50 *_insAll direct attachments:level set transparency 50 file:*.* *_insAttachments at first nest depth level:level set transparency 50 file:*.*->*.* *_insAttachments at second nest depth level:level set transparency 50 file:*.*->*.*->*.* *_insNotes:This is a global setting in Level Manager, all the views are affected.To make the levels non-transparent, run the same key-ins with value: 0In a similar way the level priority etc. can be setThe *.* in the file name of course can be replaced by the intendedfilename.extension.In case the file name and/or level name contains spaces, enclosed thosenames in double quotes.