You are currently reviewing an older revision of this page.
Request for MicroStation, or applications built on the MicroStation platform, to be able to shutdown automatically after passage of a predetermined amount of time.
A built-in configuration variable MS_IDLETIMEOUT has been included that allows you to define a set amount of idle time after which MicroStation will shut down. A minimum of 30 minutes can be used within this configuration variable and if set to 0 the software will never exit, even if idle.
When defined time period of non-use or idleness has been reached a dialog box will appear advising MicroStation will be terminating in 60 seconds. If you click on the OK button you can continue to work, otherwise MicroStation will then shut down.
Ideally this variable should be controlled by the site configuration, it is generally an option that would be applied across a whole organization or workgroup.
To set the time out to 30 minutes (the minimum) add the following line to the site configuration, to standards.cfg or it's equivalent.
MS_IDLETIMEOUT = 30
The default location for standards.cfg is C:\ProgramData\Bentley\.....\WorkSpace\Standards
In a networked workspace add this variable to the site configuration.
To enforce a time out period the variable can be locked at site level by adding a %lock statement:
%lock MS_IDLETIMEOUT
MS_IDLETIMEOUT only takes effect during an Active application session, i.e. if a DGN file is open.
If DGN file is closed and an application is left at a file open dialog MS_IDLETIMEOUT will not have any effect.
Users should still be advised to close applications when they do not need to use them.
The Idle tool for these older versions "idle.ma" is available on request from technical support staff.
Español Français
Road and Site Design - Idle Timeout
Product TechNotes and FAQs
Bentley LEARN Server
Bentley's Technical Support Group requests that you please confine any comments you have on this Wiki entry to this "Comments or Corrections?" section. THANK YOU!