When saving to V7, some elements in the file do not show the same as itdid in the V8 file. Reference attachments are not showing in the correctlocation.Working units are different.Product: MicroStation Version: 08.05.00.00Area: Save as V7
The V8 message center will contain a message:Save of <(><<)>model name> complete, warningsWarnings:GEOMETRY EXCEEDS V7 DESIGN EXTENTS, APPLYING SCALE OF AND SHIFTINGORIGINV8's Design area is much larger than V7's. There were elements out sideV7's solid working area and was shifted and/or scaled to fit the V7design extents.UORPERSUB IS NON-INTEGER, V7 MASTE R UNITS SET TO V8 STORAGE UNITSThis means that the V8 resolution was not equally divisible by thesubunit to obtain a position al unit value for the V7 file. The storageunits means that the resolution value was used as the Positional units,and the Sub un it was equaled to the Master unit.ATTACHMENT OF 3D REFERENCE FILE <(><<)>name>.DGN TO 2D MODEL IS NOTPOSSIBLE, DISCARDEDMSV 7 does not support 3D references attached to 2D files so thereference attachment is removed.LEVEL OF DIMENSION LEVEL IN T CB GREATER THAN 63, USING DEFAULTVery common message. If the a level is not set for dimensions, it usesthe "default" level which normally gets the number value of 64. Sincethat is higher than 63 (V7's level limit), the level gets changed to 0.REFERENCE FILE NAME TOO LONG: <(><<)>path to file> DISCARDEDThe full path is longer than the V7 limit of 65 characters.Note: If t he file was originally attached without "save full path" inV7, the found path will not get written to the file when saved.<(><<)>active z|view origin.z|view delta.z> FOR VIEW 0, TRUNCATED3D file exported to 2D in V8. 3D view data is stored incase file isexported back to 3D.<(><<)>file name> IS OFF DESIGN PLANE, DISCARDEDAttached reference file is totally off of the V7 design plane.